1. The primary side is 1 loop with 6 contactors are configured each to control the output of
220V/400V/480V/500V/540V separately.
2. Push-button switch is used to control the output of the contactor. The loop contactor interlock can only have one voltage output.
3. The equipment is equipped with temperature monitoring (winding temperature, core temperature) switching, and the fan is started to cool when the internal temperature is higher than 60 degrees Celsius, and the fan is stopped when the internal temperature is lower than 45 degrees Celsius. Alarm sound occurs when the internal winding temperature exceeds135 degrees Celsius. The transformers automatically shuts down the total input power when the temperature is greater than 150 degrees Celsius.
4. Product total weight nearly 1500KG.
Electric Characteristics
Item |
Parameter |
Value |
Remark |
1 |
Model Number |
BC-E00043A |
|
2 |
Phase number |
Three Phase |
|
3 |
Rated Capacity |
250KVA |
|
4 |
Rated Input Voltage |
1140V |
|
5 |
Rated Output Voltage 1 |
690V |
|
6 |
Rated Output Voltage 2 |
400V |
|
7 |
Rated Load Voltage Percentage Deviation |
+/-3% |
|
8 |
Connection Group |
Dyn11 |
|
9 |
Insulation Grade |
H |
|
10 |
Temperature Rise |
<115K |
Hottest spot in the coil at rated load |
11 |
Efficiency |
>98% |
145ºC |
12 |
Cooling Type |
AN |
Natural air cooling |
13 |
Rated short circuit impedance percentage |
(2.5+/-1)% |
|
14 |
Rated load input current |
126.6A |
|
15 |
Peak excitation inrush current |
<10In |
at rated voltage |
16 |
690V rated load output 1 current |
120A |
|
17 |
400V rated load output 1 current |
90A |
|
18 |
400V rated load output 2 current |
32A |
|
19 |
400V rated load output 3 current |
32A |
|
20 |
400V rated load output 4 current |
16A |
|
21 |
230V rated load output current |
16A |
|
22 |
Overload capacity |
1.1In/1.1Un |
Ambient Temperature 25ºC |
23 |
Measured no-load current |
Max 3A |
|
24 |
Operation mode |
Rated load |
|
25 |
Noise label |
<65dB |
1 meter horizontal distance |
26 |
Primary side to secondary side isolation voltage intensity |
<10mA, no arcing, no breakdown |
3KV AC, 60S |
27 |
Primary side to ground isolation voltage intensity |
<10mA, no arcing, no breakdown |
3KV AC, 60S |
28 |
Secondary side to ground isolation voltage intensity |
<10mA, no arcing, no breakdown |
3KV AC, 60S |
29 |
Primary side to ground insulation impedance |
>100MΩ |
500VDC |
30 |
Secondary side to ground insulation impedance |
>100MΩ |
500VDC |
31 |
Primary side to secondary side insulation impedance |
>100MΩ |
500VDC |
32 |
Local discharge limit |
N/A |
|
33 |
Cabinet protection grade |
IP54 |
|
34 |
Thermostat type |
Normally closed restorability |
|
35 |
Thermostat operating temperature |
160+/-5ºC |
|
36 |
Thermostat qty |
2 |
|
37 |
Thermostact connection type |
parallel connection |
|
38 |
Iron yoke material |
Non-oriented silicon steel sheet |
|
39 |
Iron yoke brand |
30A150 |
|
40 |
Rated flux density |
1.297 |
|
41 |
Saturation flux density |
1.7T |
|
42 |
Primary coil material |
Copper |
|
43 |
Secondary coil material |
Copper |
|
44 |
Primary coil section |
72 mm2 |
|
45 |
Secondary coil section |
60 mm2 |
|
46 |
Primary current density |
1.75 A/mm2 |
|
47 |
Secondary current density |
2.0 A/mm2 |
|
48 |
Primary side number of windings |
148TS |
|
49 |
Secondary side number of windings |
52TS/30TS |
|